Krone BigX 1100 Beast Pack v 12.10 Beta [MP]

Krone BigX 1100 BeastPack

Krone BigX 1100 BeastPack

Krone BigX 1100 BeastPack

1: Preface

The Beast Pack project have been around for almost 4 years, restive, the pack has evolved and improved. It is equally proceed.

So up to this point first thanks to all of you who helped with the Site and to the people to realize the project.

2: Pack Contents 8 mods

Krone BigX 1100 Beast
Krone ÜLW dolly axle Cargp3 prototype
Krone Easy Flow Pickup
Krone Easy Collect Maisgebiss
Krone XDisc cutter for Grass and Grain
Krone Header Trailer
MAN TGS 8×8 agricultural
MAN TGS agricultural Bergmann Silage construction

3: Specification

Pack.zip Size 98.01MB

4: Functions & Keyboard Layouts

! Please also pay attention to the right device for you if what you want on / switch, the Hud note in the upper left corner and the it!

(Must be BigX selected) Twin wheels button KEY_KP8
(Must be BigX selected) chains Trac Soucy button KEY_KP7
Counterweight on (BigX must be selected) button KEY_B
Counterweight off (must be BigX selected) button KEY_X
Pipe show (must be BigX selected) Press O
(Must be BigX selected) silage tank in / out without function key L

Open and close button Dolly bunker (Cargo must be Dolly selected) KEY_M
Dolly bunker rotate (Dolly Cargo must be selected) Press X
Dolly bunker ÜLW Trailerlift axis (Dolly Cargo must be selected) KEY_v
ATTENTION Dolly can be folded on street only empty !!!

MAN TGS agricultural attacher coupling high (MAN must be selected) button KEY_5
MAN TGS agricultural attacher clutch down (MAN must be selected) button KEY_6

MAN Bergmann Trailer prop left high (Bergmann must be selected) button KEY_n
MAN Bergmann Trailer prop left down (Bergmann must be selected) button KEY_j
MAN Bergmann trailer prop right up (Bergmann must be selected) button KEY_m
MAN Bergmann trailer prop right down (Bergmann must be selected) button KEY_L
ATTENTION operation of the supports on the outside of the switches (see picture)

5: Known Bugs

Recommended cluttered only in the state

6: For the future

Multicolor
Indoor Sound
IC control
Pack clean up continues
Revise Twin wheels
BigX silage tank dirt
Create LowAttacher hitch
Adjust driving performance
Lighting 3.1 block again
Remove Indoor lighting display more
Revise cutting transport protection model
Revise Particle systems BigX Pipe and Cargo
About loading cargo while cruising permit without losses
MAN cabins backlight
MAN Bergmann transport flaps
What you still such a / notice

7: Update History

Much time I had for the project but it should be enough for the first version in LS15. There are still problems in moving overloaded. So please overloaded only in the state or else you lose what would blow the BigX during the overcharge in the bunker. But should be fixed in the next version.

Well, the tests I leave as always you, surrender times ordenlich feedback.

If anyone else has this interest Pack to develop in terms of equipment, textutierung, hunt 3D work or the MR conversion, simply mail in my mailbox …

So have fun with the pack 🙂

Version 12.10 BETA:
– IC control installed
– Fitted seat suspension
– Installed light indicator
– Indoor Lighting revised (Terminal Air)
– IC animations
– Enlarged display terminal
– Passenger Script installed
– Wipers installed
– Fitted tires
– Lighting installed
– Fixed Tacho
– Twin wheels installed
– Re-textured interior
– Installed RPM Script
– Animated armrest
– Decoration for items installed
– Terminal Bootscreen
– Driving Direction Indicators
– Tire tracks and tire dust Cargo
– Animated sun visor
– Installed Indoor Sound
– New indicators on Terminal
– Revised Shift Able Mass Script
– New silage tank
– Camera script installed for better indoor view of Cargo
– Cabins installed lighting
– Cargo Attacher installed for SSW
– Installed Camera Work Script
– Changed Pipe Particel
– Pipe Adapted for Cargo
– Optional Gearbox Installed
– New Dirt and twin wheels
– Switchable Transport Protection
– Ready for Patch 1.4.1

Changelog LS2015 06/04/2015 19.30pm V.12.0 Beta:

– Created new pack
– Reworked textures
– Reflections away
– Cargo Dolly ULW integrated
– Cargo Dolly washable created Dirt
– Cargo Dolly xml tuning and adapted to BigX
– Installed BigX large pipe to the fold
– Adapted BigX xml tuning and on Cargo
– Installed track
– Built twin wheels
– Tinted dark
– Fixed flickering discs
– Lever Installed
– New textured Pipe
– Sound revised
– XML ??Tuning
– New terminal display with tachometer and lighting
– Interior lighting installed
– Silage tank built “without”
– Cutting transport protection Installed
– Installed Dolly standard light
– Weight of the harvester removed for cargo operations
– Added optional rear weight 2 tons
– Agro MAN Truck 8×8 Conversion
– MAN Bergmann Silage conversion
– …

Courseplay rdy (developer version)

AutoCombine rdy

DriveControl rdy

GPS

Credits:

v12.0 April 2015
Upsidedown, xyzspain, JokobT, Johnny1980, Repi, Kyosho, Rafftnix, Biedens, Bullgore

——————————————————————–
v11.1 April 2014
by Bullgore, Kubo, JoakobT
– Schemas angepasst
– Attacher für SWW angepasst
– Attacher EasyFlow angepasst
– Optische Fehler behoben.( Sichtbare Achse )
– Fehler beim “zurücksetzen” behoben
– Maiseinzug PS EasyCollect angepasst
– Dolly ÜLW Scripte überarbeitet
– Dolly ÜLW Gewicht Ladung angepasst
– Dolly ÜLW kann nur noch leer zusammengeklappt werden
– Fahrverhalten BIGX komplett überarbeitet, Motor, Bremse, Federung, Schwerpunkt, Lenkung usw.

——————————————————————–

v11.0 Jun 2013/ April 2014
by Bullgore, Eribus, Biedens, Upsidedown, Kubo
– Patch Giants 2.1 rdy
– Sound Fehler behoben
– aiautocombine.lua dolly überarbeitet für Autocombine
– Waschbar, dauert 5 Stunden
– Odometer deaktiviert, gibt es Global siehe MIG-Map Pack
– Dirt Texturen erstellt
– Sound Fehler behoben
– Gewicht korrekt eingestellt, durch die Luft fliegen ist nun behoben
– XDisc Klee und Luzerne rdy
– Sound Lautstärke angepasst
– Allrad deaktiviert
– l10n Fehler behoben
– Ketten schweben nicht mehr
– I3D´s und XML aufgeräumt, umbenannt etc
– Shopdaten überarbeitet
– Probleme beim Rückwärtsfahren behoben
– Mauscontrol BigX vorerst deaktiviert
– Easyflow Scriptfix

——————————————————————–
V10 Feb 2013/ April 2013
– Neuen BigxX 1100 integriert von Johni6530
– Scripte verbaut Odometer,Gaslimiter,Indoorsound etc.
– Scripte überarbeitet
– Fahrverhalten neu angepasst
– Ketten BigX verbaut
– Zwillingsräder verbaut
– XML Tuning
– Textur von BigX etwas dunkler gestellt
– …

——————————————————————–

Krone EasyFlow 380 eingebaut März 2013

Modell: Pille?!
AO / Textur: Pille?!
Scripts: milan1702976 (fs-uk.info)
Partikel-System: Eifok-Team
Tuning/Performance: Lordtex/Milan(fs-uk.info)
Tester: Ostsee75, Lindemann, Bullgore,Pille?!,Illuminated,FSM-Chefkoch
Lordtex
HomePage: http://www.modding-küche.de

——————————————————————–

V9.2
Indoorcam tiefer gestellt
STX zum Einblenden verbaut
Gewicht erhöht

Allrad
Odometer
Lenkradsperre
Gaslimiter
Hektarzähler verbaut

Lenkgeschwindigkeit gesenkt
Beschleunigung eingestellt
Fahrverhalten angepasst
Gewicht wie in LS11 eingestellt wg. Ülw
Sounds etwas überarbeitet
Powershaft installiert
Powershaft ÜLW Kabel verlängert
Kameraradius erhöht
HUD´s angepasst

——————————————————————–

Umbau Twinwheels April 2012:

>>> by Repi <<>> by Michi <<>> by Repi <<>> by Repi <<>> by Repi & Bullgore <<>> by Alex2009(www.alex2009.de, www.mra-modding.de) <<<
– GreenStar Einbau überarbeitet
– GreenStar auf V1.1 geupdatet

Krone BigX 1100 Beast Pack v 12.10 Beta [MP]
3 (60%) 2 votes

19 thoughts on “Krone BigX 1100 Beast Pack v 12.10 Beta [MP]

    1. do you know why when hiring a worker, the harvester once turnedaround does not re-engage the header, it just keeps on driving over the crop?

  1. Big X and Dolly when turning with hired worker, the header stops picks up and then after turn the header doesnt lower again. Worker just continues driving and nothing gets harvested.

    Any thoughts?

Leave a Reply to raymon Cancel reply

Your email address will not be published.